Metal sliding door frames
Door frame for doors that slide away from the wall.
Metal frames for sliding doors 410
Description
Frame for doors that slide away from the wall, suitable for all types of walls, from 75 mm thick.
The aluminum rail with roller layers and end stops is attached to the wall above the frame and finished with a separately supplied cover.
The frame is always placed on a finished floor.
If a closing profile is not desired, a normal frame with profile D can be installed. The cover must then be ordered separately. However, a lock is not possible in this case.
Dimensions
| Deurbreedte | 830 | 930 | 1030 | 1130 | 1230 |
| Vrije doorgang | 800 | 900 | 1000 | 1100 | 1200 |
| Totale breedte | 870 | 970 | 1070 | 1170 | 1270 |
| Muuropening type 1D | 880 | 980 | 1080 | 1180 | 1280 |
| Muuropening type 3D | 850 | 950 | 1050 | 1150 | 1250 |
Default door height:
- 2015 mm
- 2115 mm
- 2215 mm
- 2315 mm
Customization is also possible.
Since frame 410 is not symmetrical, the sliding direction must be specified when ordering.
These frames are not suitable for fire-resistant doors.
Metal sliding door frames 420
Description
Frame for doors that slide into the wall. The double wall usually consists of 2 light partition walls, but can also be a combination with existing masonry. The frame must always be installed together with the wall.
The aluminum rail with trolley and end stops is fixed in the niche and can be dismantled at any time later on without opening the wall.
The door closes in the special closing seal.
The frame is always placed on a finished floor, and can be produced for any wall thickness.
The sliding door can be fitted with a hook lock.
Dimensions
Default door height:
- 2015 mm
- 2115 mm
- 2215 mm
- 2315 mm
Customization is also possible.
The symmetrical design makes this frame suitable for left and right doors.
These frames are not suitable for fire-resistant doors.
Metal sliding door frames 520
Description
This frame consists of a complete built-in system for doors that slide into the wall. With a frame consisting of metal profiles that is finished with plasterboard.
It is actually a variant of sliding door frame 420 and can only be used with light partition walls of 125 mm thickness, which connect seamlessly to the frame.
The aluminum rail with trolley and end stops is fixed in the niche and can be dismantled at a later date without opening the wall.
The door closes to the closing seal.
The frame is always installed on a finished floor. The sliding door can be equipped with a hook lock.
Dimensions
Default door height:
- 2015 mm
- 2115 mm
- 2215 mm
- 2315 mm
The possibility of customization is limited to door width and height.
The symmetrical design makes this frame suitable for left and right doors.
These frames are not suitable for fire-resistant doors.
